Mr. K ordered a Zippo from me with oak leaves. I’ve never done any oak leaf designs and engravings before, so yet again this was something new for me. I didn’t want to do literal oak leaves as they appear in real life, but something more stylized. It took quite a while to come up with this design, considering how simple these leaves actually appear. It’ll be much faster next time. Total time spent including design was 16.5 hours.
Zippo with oak leaf engraving
Oak leaf Zippo - backside
This had to happen sooner or later – engrave some jewelry. It’s a first try with a new technique, so I started out cheaply – sterling silver ring done in lumenesque style. Basically a modified bright cut for jewelry. Very bright and shiny indeed.
Engraving was quite a challenge, as there are two radii to follow with a graver (ring itself and the curved surface) and I have no muscle memory for this yet. Cuts are made with highly polished graver to make the cut surfaces mirror-like. Surprisingly, it came out quite all right.
Here’s the final result.
Engraved ring
Ring engraving close-up
Ring on a finger
Few more practices, then I can make one to rule them all.
This one is currently on sale, contact me for a price.
About two months ago I started my first gun engraving project – STI Trojan. Today finally this saga has come to a successful finish. Here’s the final result:
Engraved STI Trojan
STI Trojan - right side
The main reason it took so long to finish this project was the problem with hot bluing. At first I used my home-brew bluing salt, which worked out rather well the first time. I got really nice deep blue-black finish and was quite happy about it. But as I was lightening up the engraving with phosphoric acid, we call the process ‘French grey’, some of the acid accidentally spilled to other parts of the slide and messed it up. So I had to remove all the bluing and redo everything again. Long story short – I got the bluing right on the fourth try, after buying a commercial salt from Germany and learning severals lessons from my silly mistakes.
Here’s a little walk-through of the whole project.
First of all the original blue has to be removed and parts refinished, so they are worthy of receiving a good engraving. Here’s the slide ready to go, after 4 hours with sandpaper and sticks:
Trojan slide in white
The design is transferred to the slide and ready to be engraved:
Design transfer
Shading in process:
Shading the engraving
Engraving is finished, but still in the white. Time spent so far – about 20 hours:
Engraving finished
Now comes the bluing process. First and foremost, the metal to be blued has to be really-really clean. Every drop of oil and fingerprint will leave ugly spot on the metal and we don’t want that. Hot bluing is done in a salt at temperature 150-180C. The solution is alkali, so if it gets on your skin at that temperature, you’ll have an interesting experience. In a bad way.
Hot bluing
Next up – French gray. The area to be grayed has to be masked off, the cheapest fingernail polish works well. Applying mild phosphoric acid to the area will remove the blue and makes it gray. Black background and gray engraving looks rather good and the contrast helps a lot for the visibility.
Mask for french gray
Finished.
Engraving close-up
Trojan side view
Every time I start a new project, which doesn’t have too many constraints design-wise I’ll try to experiment with it. This Zippo was just like that, client wanted scrollwork and gave me a budget. So I tried something new and here is the result:
Hand engraved Zippo
I spent twice as much time as budget allowed, but I think the result came out allright.
Engraving my iPhone is something I’ve wanted to do for quite some time now, the plain metal border was so tempting. I’ve searched the net, but haven’t yet found any hand engraved iPhones. There are a lot of laser engraved ones and cases, but to me laser engraving is not really a true engraving. So someone must start with the handmade.
For starters I engraved the bottom part of it, so when I did screw up, it wouldn’t be too noticeable. The metal seems to be some kind of stainless steel and a very tough one too. I broke many-many graver tips during the process and at least 1/4th of the time was spent on re-sharpening the gravers.
Scroll design is very basic and I drew it straight on the phone using china white and pencil. The width of the metal border is 3mm.
This section took 8 hours to complete. I’m not yet sure if I’m going to engrave the top and/or sides too. Maybe sculpting and/or some gold inlay?
Engraved iPhone
Finally I have something to show when trying to explain what kind of engraving I actually do.
Quite a while ago I started one knife engraving project in sculpting. As it happened, it took longer than expected and now I finished the first side of the knife. This project is mainly a learning experiment, both the technique and style are rather experimental. This one side took 51 hours to complete.
Total length of the knife is 16cm, handle is 8.8cm.
Engraved knife full length
Engraved folder
Engraving close-up
Engraving close-up
English scroll is a very old and traditional style, that has appealed to be for quite a while. Until now I haven’d had a chance to learn how it’s done, but that all changed at Engrave-In, where Simon Lytton was kind enough to instruct me a little. The style is structurally quite simple and fast to cut, there is no background to remove.
This tiny Spyderco Honeybee was a gift for a friend and here I tried to apply all that I remembered from that theoretical instruction. Time taken for both sides was 7 hr 15 min.
Hand engraved Spyderco Honeybee
Engraved Spyderco
Engraved Spyderco knife
